SPRINKLER REPAIR
FAQ

Usually an electrical problem. The most common causes are: a tripped GFCI outlet near the controller, a failed rain or freeze sensor, a dead battery in a battery-powered controller, a cut or corroded wire, or a failed controller itself. Call us with a description and we can often narrow it down before we even arrive.

Low pressure in a single zone typically points to a lateral line leak, a valve that isn't opening fully, severely clogged nozzles, or a failing valve diaphragm. We'll trace it quickly. It's rarely the water main — if other zones work fine, the problem is zone-specific.

Dry spots despite a running system usually mean coverage gaps — worn nozzles that have lost their spray radius, heads that have been knocked sideways by mowing, or zones that were never designed to reach those areas. We'll do a zone-by-zone coverage check and fix the distribution.

A stuck-open valve is the most common cause — the valve solenoid has failed in the open position and water is trickling through constantly. A cracked lateral pipe is the other culprit. Either way, it's wasting significant water and needs to be addressed quickly.

Low-head drainage — water slowly draining out of the lowest head in a zone after the system shuts off. It's usually normal, but if it persists for hours or leaves a large puddle, a check valve inside the head may be worn out. Easy fix — we replace the head or insert a check valve.

The controller battery is likely dead or the capacitor that holds memory is failing. On older controllers (10+ years), the unit may need replacement. We'll test it on-site and either replace the battery or recommend a modern controller upgrade.

We give you a straight number before we start work — no surprises when the invoice arrives. Call us, describe what you're seeing, and we'll tell you what it typically runs. Most residential service calls are completed in one visit.

Yes. We offer scheduled seasonal maintenance programs for residential properties, which typically include spring startup, mid-season adjustment, and fall shutdown or winterization. Ask us about current program pricing when you call.

For most areas, we can schedule within 1–3 business days. For urgent situations — active leaks, flooding, or commercial emergencies — call us and we'll do our best to accommodate same-day or next-morning service.

We're upfront about all charges before we start. Call us to discuss your situation — we'll tell you what the diagnostic process involves and what it costs for your type of issue.

Most years, no. But hard freezes — which Texas gets more often than people expect — can crack PVC pipe, split backflow preventers, and rupture head bodies overnight. A simple winterization (draining zones and wrapping the backflow preventer) is cheap insurance. We offer this service every fall.

Once overnight temperatures are consistently above 35°F — typically late February in Houston and March in DFW. We recommend a spring startup check every year to inspect heads, test all zones, and adjust run times after the winter.

Most Texas water districts have specific day-of-week and time-of-day restrictions, especially during drought periods. We program your controller to comply while still giving your lawn adequate coverage. Smart controllers with local weather data integration are the best long-term solution.

Not typically by homeowners insurance, but it's a straightforward repair. We carry common backflow preventer parts on our trucks and can replace failed units in most cases same-day. We also provide the required state test report after replacement.

Yes. Texas law requires annual testing for any irrigation system connected to the municipal water supply. Failure to test can result in fines and disconnection from the water supply. Our licensed testers perform the required test and file the report directly with your water district.

Yes. Every technician who works on irrigation systems is a State of Texas licensed irrigator. We carry full liability insurance and pull permits when your municipality requires them for new installations.

Yes. We handle permit acquisition and work with your local municipality's inspection process for any new system installation or major modification that requires a permit.

We service all major irrigation brands: Hunter, Rain Bird, Toro, Irritrol, Weathermatic, Rainmaster, K-Rain, and others. For controllers, we install and configure Hunter HydraWise, Rain Bird ESP-Me/ESP-SMT, Rachio, and most legacy units.

For most Texas properties, yes — especially if you have an older dial-type controller. Smart controllers (Rachio, Hunter HydraWise) adjust run times automatically based on local weather data, significantly reducing overwatering. Most customers see a 20–40% reduction in water usage.

Usually. Many older system components are compatible with current replacement parts. In cases where a direct replacement isn't available, we'll recommend a retrofit option and walk you through what that involves before starting work.