4 Common Sprinkler Issues in Argyle Homes

A green, healthy lawn is the pride of any Argyle homeowner. Mr. Sprinkler Repair is the trusted partner working behind the scenes to keep your sprinkler system in top shape and make that possible. But when it stops working correctly, your beautiful landscape can quickly suffer. Understanding common sprinkler problems can help you spot trouble early and know when to call in the professionals.

This guide from Mr. Sprinkler Repair in Argyle will walk you through four frequent issues that can disrupt your irrigation system. We’ll explore what causes them and explain how our expert team can keep your lawn looking its best. From simple connection problems to more complex electrical failures, Mr. Sprinkler Repair has you covered.

Hose Bibb Connection Problems

The hose bibb, or outdoor spigot, is a critical link between your home’s water supply and your irrigation system. A poor connection here can lead to frustrating and wasteful problems. You might notice a constant drip, a significant leak when the system runs, or low water pressure that prevents your sprinklers from covering your lawn effectively.

Leaks at the hose bibb connection often waste a surprising amount of water over time, leading to higher water bills and potential water damage to your home’s foundation. Low pressure, on the other hand, results in dry, brown patches across your yard because the sprinkler heads can’t pop up or rotate as designed.

At Mr. Sprinkler Repair, we can quickly diagnose the cause of your hose bibb connection issues. Whether it’s a worn-out washer, a cracked fitting, or improper installation, our technicians have the tools and expertise to secure the connection. We ensure a tight, leak-free seal that restores proper water pressure and eliminates waste, protecting both your lawn and your wallet.

System Age and Deterioration

Like any outdoor equipment, your sprinkler system faces constant exposure to the elements. Over the years, this leads to natural wear and tear. Plastic components can become brittle and crack, metal parts can rust, and underground pipes can shift or be damaged by tree roots. An older system is simply more prone to malfunctions.

Signs of age-related deterioration include:

  • Sprinkler heads that don’t pop up or retract.
  • Cracked or broken sprinkler heads that spray water erratically.
  • Visible leaks or puddles forming around sprinkler heads or in your yard.
  • Inconsistent water coverage, leaving some areas soaked and others dry.

Ignoring these signs can lead to more significant problems, including major leaks that can erode your landscape. Regular professional inspections are the best way to combat age and deterioration. Our team can identify aging parts before they fail completely, performing targeted repairs and adjustments to extend the life of your system. For systems that are beyond efficient repair, we can recommend and install modern, water-wise upgrades that improve performance and reduce water consumption.

Valve Solenoid Burnout

Your sprinkler system’s valves are the traffic cops that direct water to different zones. The solenoid is the small electrical component that tells the valve when to open and close. When a solenoid burns out, the valve it controls is stuck—either open or closed.

If a valve is stuck open, one zone of your sprinkler system will run continuously, flooding your lawn and causing a massive spike in your water bill. If it’s stuck closed, that zone will not get any water at all, leading to a large, dead patch in your yard. Solenoid burnout is often caused by electrical issues, such as a power surge, faulty wiring, or simply old age.

Diagnosing a burnt-out solenoid requires technical knowledge and the right diagnostic tools. The technicians at Mr. Sprinkler Repair can safely test your system’s electrical components, identify the failed solenoid, and replace it. We also inspect the wiring and controller to ensure there isn’t an underlying electrical problem that could cause future burnouts, restoring reliable, automatic control to your irrigation system.

Failed Pump Systems for Well Water

Many properties in and around Argyle rely on well water for their irrigation needs. These systems use a pump to draw water from the well and provide adequate pressure for the sprinklers. When the pump fails, the entire irrigation system comes to a standstill.

A failing pump might show several warning signs before it stops working completely. You might hear strange noises from the pump, notice a significant drop in water pressure, or find that the pump cycles on and off more frequently than usual. These issues can stem from mechanical failure, electrical problems, or issues with the well itself.

Repairing a sprinkler pump system is a specialized job. Mr. Sprinkler Repair has extensive experience with well-fed irrigation systems. We can diagnose the root cause of the pump failure, whether it’s a motor issue, a bad pressure switch, or a clog in the intake line. Our experts can repair or replace the pump to restore strong, consistent water flow, ensuring your lawn gets the hydration it needs directly from your well.

Don’t Wait for a Brown Lawn—Call the Experts

A functional sprinkler system is essential for maintaining a vibrant landscape in the Texas climate. Proactive maintenance and timely repairs save you water, money, and the headache of dealing with a dying lawn. By addressing common issues like hose bibb leaks, system deterioration, solenoid burnout, and pump failures, you can ensure your system operates efficiently all season long.

If you’re noticing any of these problems or just want to ensure your system is in top shape, it’s time to call in the professionals.

Contact Mr. Sprinkler Repair in Argyle today to schedule an inspection, repair, or system upgrade. Let us help you keep your lawn green and healthy!